oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 809-sl75.1m-27c 75.1mhz if saw filter 27.5 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 809-sl75.1m-27c january 2011 rev a 75.1mhz if saw filter 27.5 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, e, f, g, h, j ground i input d output test fixture & values input l1=100 nh, c1=12 pf output l2=120 nh source/load impedance 50 ?
oscilent part number 809-sl75.1m-27c january 2011 rev a 75.1mhz if saw filter 27.5 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c - 25 - storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 75.1 - insertion loss at fo db - 18.2 19.0 amplitude ripple variation at fo 12.5 mhz db p-p - 0.3 0.6 group delay variation at fo 12.5 mhz nsec - 15 35 absolute delay at fo sec - 0.83 - temperature coefficient ppm/c - -86 - bandwidth at ?1.0 db mhz - 27.50 - bandwidth at ?3.0 db mhz - 28.40 - bandwidth at ?30.0 db mhz - 32.40 32.80 relative attenuation lower sidelobe db 30 40 - upper sidelobe db 30 40 -
oscilent part number 809-sl75.1m-27c january 2011 rev a 75.1mhz if saw filter 27.5 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?30.0 db bandwidth at ?40.0 db
oscilent part number 809-sl75.1m-27c january 2011 rev a 75.1mhz if saw filter 27.5 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo12.5mhz group delay variation fo12.5mhz smith chart
oscilent part number 809-sl75.1m-27c january 2011 rev a 75.1mhz if saw filter 27.5 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|